What Gas Does Poulan Pro Pr5020 Use? 

What Gas Does Poulan Pro Pr5020 Use

Poulan seems like a brand we have never heard of. But did you know we all might have at least used it once? It is a well-known brand that produces quality products that can ease your outdoor activities.

Today, using this article, we will discuss a very special product by Poulan Pro that is easy and handy to use. It is the most trusted choice of many professionals. Poulan Pro PR5020 chainsaw, a perfect choice that effectively helps you accelerate your work.

As we progress, we also tend to touch various aspects of the subject, especially trying to understand what gas a Poulan Pro PR5020 uses? So, without delaying it any further, let us jump straight to the topic.

What Gas Does Poulan Pro PR5020 Use?

This chainsaw is appreciated for a lot of reasons. From being handy to use to have the best efficiency in functioning as compared to other counterparts, it just grabs your attention for all the right reasons.

The engine of the PR5020 chainsaw works on both oil and gas, but the engine’s fuel consumption is very low. It uses less fuel but still manages to provide excellent service.

A lot of chaos and confusion has been created among the users on understanding what type of gas can be used for the Poulan pro pr5020 chainsaw. There are several estimations made on the same, but still, consumers fail to understand.

Therefore, to ease it, we have your answer placed in the best possible way. The units of Poulan Pro run on 87 octanes unleaded gasoline. One can use gasoline that is perfectly blended with not more than 10% alcohol. Ensure only to use fresh gasoline.

Since we mentioned above that the engine performs with a mixture of oil and gas. So, it is very vital to understand their mixing proportion. It is advisable to mix 3.2 ounces of Poulan 2-cycle air-cooled engine oil with 1 gallon of fresh unleaded gasoline. The best proportion is formed when one receives the ratio of 40:1.

Benefits Of Poulan Pro PR5020

The Poulan Pro PR5020 chainsaw is of great use and is highly recommended by professionals who have already used it. Not only is it easy to operate, but it also allows you to make effective cuts at easy efforts. Check out its few benefits, listed below..

  1. Easy operation
  2. Handy & Efficient
  3. Automatic oiling system
  4. Extremely durable and affordable
  5. Comes with a 20-inch Bar & Chain.
  6. Causes less vibration. 

No products found.

Poulan Pro PR4218, 18 inch Chainsaw, 42cc 2-Cycle Gas Powered Chainsaw, Case Included
  • 42cc, 2-stroke engine with 18" Bar
  • Ideal for medium-duty storm clean-up, cutting firewood, and felling trees
  • Includes: Carry Case, Extra Chain, Built-in Scrench, 2-Stroke Oil
  • Power source type: Gas
  • Trouble shooting steps: Scroll down the catalog for user manual


Understanding the oil and gas ratio is very vital for the effective functioning of the chainsaw engine. Therefore, it is always better to know them in detail to avoid any dysfunction in the future.

We hope this article helped you answer your confusion regarding the gas usage in the chainsaw. But if in case you still have any doubt on the above-discussed subject, please feel free to voice it using the comment section below. We will get back to you at the earliest possible with the best knowledge available on the same.

Sandy Jensen
Sandy Jensen is the founder of OrganizeWithSandy and Works with Champalimaud Design where she curates and creates fresh ideas for designing and styling your life.

Poulan Pro Pr5020 Vs Tanaka Chainsaw (Quick Comparison) 

Previous article

How to Replace the Ignition Coil on Poulan Pro PR5020 Chainsaw

Next article

You may also like


Leave a reply

Your email address will not be published. Required fields are marked *

More in Maintenance